|
|
| Unique parallelogram support system |
| Features: |
 |
Adjustment: Parallelogram w. crank allows the table to move in
the same arc as the cutter-head when raised or lowered keeping clearance to a minimum |
|
6 row Shear Tec II helical cutter-head |
|
Deep gullets in the head allow chips to exit fast and keep the
machining area clear of chips |
|
54 four-sided German carbide helical cutter inserts set into the
head on a flat landing surface which allows more torque to be
applied when fixing |
|
Inserts angled to give a shear cut with low impact and less
kick-back action—edge crowned to prevent lines appearing |
|
6 rows of cutters in each head for premium results |
|
2108mm long bed allows for very long work pieces |
|
Fully enclosed steel cabinet protects motor and mechanics |
| |
|
| Technical Information: |
|
Motor: |
3 HP, 1 Phase, 15 Amp |
|
Cutter head: |
5000 RPM |
|
Fence Tilt: |
90° & 45° with Positive Stop |
 |
|
Width of cut: |
200mm |
 |
30MB |
|
|
Depth of cut: |
12.5mm |
|
Rabbeting capacity: |
12.5mm |
|
|
4 sided carbide inserts: |
6 rows x 9 = 54 |
|
|
Cutter-head diameter: |
75mm |
|
|
Table dimensions: |
200 x 2108mm |
|
|
Fence dimensions: |
127 x 914mm |
|
|
Table height : |
838mm |
|
|
Weight: |
248kg |
|
|
Dust port: |
100mm |
|
